![]()
SERIES 6000
POWER SUPPLIES/CONVERTERS & BATTERY CHARGERS
General Description: The Series 6000 products are power supplies, power converters and battery chargers designed to provide DC power and status to systems from AC power sources and DC power sources. The units are available as type 10 plug in modules or in open frame chassis for mounting on a panel.
Status outputs reflect power failure, low battery level, dc output failure and over current. On module based units there are auxiliary alarm inputs combined to form an "all alarm" output. These auxiliary inputs allow general system status input to be monitored.
The chassis version has a 16 position screw terminal for connections and the type 10 module has a 56 pin card edge connector.
MODEL 6500
POWER SUPPLY
POWER CONVERTER
Download Manual (Adobe pdf)The Model 6500 modules are a Series of Regulated Switching Power Supplies for use within a Wescom 400 or Type 10 chassis or module rack. The modules have an ABSJ plastic front panel with a lexan overlay. The 6500 is offered with a wide range of input and output voltages (see below for details), as well as power output ratings (25 & 50 watts).
The input voltage connections are made to the Power Supply via a three terminal connector rated @ 10 amps, located directly on the module PC board. All other connections ( output voltages, relay outputs, etc. ) are made via a 56 pin card edge connector via a type 10 enclosure.
INPUTS OUTPUTS POWER 120 VAC 5 VDC 25 WATT 240 VAC 12 VDC 50 WATT 12 VDC 15 VDC 24 VDC 24 VDC 48 VDC 48 VDC 125 VDC 250 VDC Any combination of one input voltage, one output voltage and one power output per supply is permitted.
MODEL 6001
POWER SUPPLY CHASSIS
A chassis mounted switching power supply which is UL approved. Input is 110 Vac and the output is 12 Vdc with a current limit of 1 amp.
SPECIFICATIONS:
- Input Voltage: 85-132 Vac @ 47 to 440 Hz
- Input Current: 0.3 A typical
- Output Power: 12 Vdc @ 1 A typical, 1.2 A max.
- Size: 6.5" D x 5.8" W x 1.7" H; 4.0" W less mounting ears.
- Weight: 24 oz.
MODEL 6011
BATTERY CHARGER CHASSIS
A chassis mounted battery charger that employs a switching power supply which is UL approved. Input is 110 Vac and the output is 13.8 Vdc with a current limit of 1 amp. These specific parameters are for the charging of sealed lead acid batteries. Current to charge the batteries may come from the internal power supply or external solar panels. The unit provides the controls for the charging process as well as providing status outputs, remote reset and the connection to a solar panel input.
SPECIFICATIONS
- Input Voltage: 85-132 Vac @ 47 to 440 Hz
- Input Current: 0.3 A typical
- Output Power: 12 Vdc @ 1 A typical, 1.2 A max.
- Size: 6.5" D x 5.8" W x 1.7" H; 4.0" W less mounting ears.
- Weight: 24 oz.
MODEL 6101/2
POWER SUPPLY MODULE
Switching power supplies which are UL approved and mounted on a type 10 plug in module. The Model 6101 is single 12 Vdc 1 amp supply while Model 6102 is a dual 12 Vdc 1 amp unit. Input to both models is 110 Vac. Specifications are similar to the model 6001 listed above.
MODEL 6011
BATTERY CHARGER CHASSIS
A battery charger that employs a switching power supply which is UL approved and mounted on a type 10 plug in module. Input is 110 Vac and the output is 13.8 Vdc with a current limit of 1 amp. These specific parameters are for the charging of sealed lead acid batteries. Current to charge the batteries may come from the internal power supply or external solar panels. The unit provides the controls for the charging process as well as providing status outputs, remote reset and the connection to a solar panel input. Specifications are similar to the Model 6011 listed above.